Grizzly H6248 User Manual download pdf (Page 8)

Model H6248 Meat Grinder-6-

Assembling Grinding

Head

1. Loosen the locking knob, and remove

the grinding head assembly from the

grinder motor housing.

2. Unscrew the lock ring and remove the

cutting plate, cutting blade and feed

screw. Thoroughly sanitize the grind-

er head, cutting plates, cutting blade,

feed screw, lock ring and attachments

(refer to Proper Sanitization on page

9 for information).

3. Before proceeding with assembly,

wipe down outside surface of grinder

motor housing with a sanitized cloth.

4. After cleaning, assemble the grinder

head by inserting the feed screw into

the barrel of the grinder head with the

longer end of the hex shaft projecting

through the back of the grinder head

barrel (Figure 2).

5. Carefully slide the cutting blade on

the square shaft on the front of the

feed screw (Figure 3).

6. Choose one of the three cutting

plates.

7. Slide the cutting plate over the shaft

and align with the locking pin located

at the bottom of the barrel of the

grinder head. ( Figure 4).

8. Screw the lock ring on to the barrel

clockwise to secure the assembly.

Figure 4. Cutting plate installation

Figure 2. Feed screw installation

Figure 3. Cutting blade installation

Barrel

Feed Screw

Throat

locking pin

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

Comments to this Manuals

No comments