Grizzly G1148 User Manual download pdf (Page 24)

-24- G1148 15" Bandsaw

Shielded and pre-lubricated ball bearings require

no lubrication for the life of the bearings. All bear-

ings are standard sizes and replacements can be

purchased from our parts department or bearing

supply store.

As for other items on this machine, such as

adjustment controls, an occasional “shot” of light

oil is just about all that is necessary. Before apply-

ing, however, wipe off any sawdust with a clean

cloth, towel or dry paint brush and spray on the

lubricant. Ensure that oil does not get on the pul-

leys or V-belts because it could cause belt deteri-

oration and slipping.

Lubrication

Always be aware of the condition of your band-

saw before using it. Routinely check the condition

of the following items and repair or replace as

necessary.

1. Loose mounting bolts.

2. Worn switch.

3. Worn or damaged blade.

4. Worn or damaged support bearings or

guide bearings.

Miscellaneous

1 2 ... 19 20 21 22 23 24 25 26 27

No comments

Grizzly G1148 User Manual Page 24