Grizzly G0622 User Manual download pdf (Page 17)

Model G0622 (Mfg 2/08+)

-15-

Assembly

To assemble the bandsaw:

1. Unfold the two stand leg assemblies. They

are hinged on the edges for easy set up.

2. Use the M6-1 x 12 hex bolts, M6-1 hex nuts,

and 6mm flat washers to install the corner

support braces in the bottom corners of the

leg assemblies (Figure 6).

6. On the other leg, insert the handle into the

pre-drilled holes and secure it with the cotter

pins (see Figure 8).

5. Slide the wheels onto the axle on the outside

of the mounting brackets, and secure them

with the cotter pins, as shown in Figure 7.

3. On one of the leg assemblies, attach the

wheel mounting bracket along with the corner

support braces to the outside bottom edge,

as shown in Figure 6.

4. Slide the axle through the holes in the wheel

mounting bracket.

Figure 6. Corner braces and wheel bracket.

Corner

Support

Braces

Wheel

Mounting

Bracket

Figure 7. Wheel assembly.

Cotter Pin

Figure 8. Cotter pins installed into

the handle.

Cotter

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 47 48

No comments

Grizzly G0622 User Manual Page 17