Grizzly G0456 User Manual download pdf (Page 16)

-14-

G0456 Variable Speed Wood Lathe

Sanding Table

Components and Hardware Needed: Qty

Sanding Table ....................................................

Table Brackets ...................................................

Dust Port ...........................................................

Lock Handles ...................................................

Flat Washers

⁄4" (Handles) ............................... 4

Cap Screws

⁄16"-18 x

⁄8" (Table) ....................... 2

Lock Nuts

⁄16"-18 (Table) ................................... 2

Flat Washers

⁄16" (Table) .................................. 2

Phillips Head Screws 10-24 x

⁄2" (Dust Port) ... 2

Lock Washers #10 (Dust Port) ..........................

To install the sanding table:

1. Mount the dust port to the casting with the

Phillips screws and lock washers.

2. Mount the table to the casting with the cap

screws, flat washers, and lock nuts through

the hinge hole; and with the lock handles

and lock washers through the slotted hole.

Figure 7 shows the table properly installed.

Figure 7. Table and dust port properly installed.

Tool Rest

The tool rest can be installed with or without the

tool rest extension. Either component installs by

sliding the shaft into the hole, then tightening it

in position with the lock handles.

Figure 8 shows

the tool rest installed in the base by itself, and

Figure

9 shows the tool rest extension installed.

Figure 8. Tool rest properly installed.

Lock Handle

Figure 9. Tool rest extension installed.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 47 48

No comments

Grizzly G0456 User Manual Page 16