Grizzly G1037 User Manual download pdf (Page 6)

Figure 1. Recommended 220V receptacle.

-4- G1037 Planer / Moulder

110V Operation

The motor supplied with the G1037 is a dual volt-

age motor, prewired for 110V. Under normal use,

the motor draws approximately 17 amps @ 110V,

8.5 @ 220V. We recommend using a 20 amp cir-

cuit breaker or a 30 amp slow blow fuse for 110V

or 220V operation. This should be satisfactory for

normal use, while preventing motor damage from

high heat caused by overload. If frequent circuit

failures occur when using the planer/moulder,

contact our service department or your local elec-

trical contractor.

220V Operation

An instruction sheet has been included for

rewiring for 220V. If this sheet is missing, call the

appropriate service center for more information.

Do not attempt to rewire without the instruction

sheet.

SECTION 2: CIRCUIT REQUIREMENTS

1 2 3 4 5 6 7 8 9 10 11 ... 35 36

No comments

Grizzly G1037 User Manual Page 6