Grizzly G0640X User Manual download pdf (Page 13)

G0640X 17" Wood/Metal Bandsaw

-11-

After all parts have been removed from the three

boxes, you should have the following items:

Main Components: (Figure

2 & 3) Qty

A. Bandsaw (not shown) ................................. 1

B. Table .......................................................... 1

C. Miter Gauge ................................................ 1

D. Fence Assembly ......................................... 1

E. Resaw Fence Attachment .......................... 1

F. Front Fence Rail ......................................... 1

G. Rear Fence Rail ......................................... 1

H. Handwheel (not shown) ............................. 1

I. V-Belt A27 (not shown) .............................. 1

J. Scale (not shown) ...................................... 1

Fasteners (and where used): Qty

Hex Bolt M8-1.25 x 100 (Positive Stop) ............

Hex Nut M8-1.25 (Positive Stop) .......................

Cap Screw M6-1 x 20 (Handwheel) ..................

Hex Bolts M8-1.25 x 16 (Table) ........................

Lock Washers 8mm (Table) ..............................

Flat Washers 8mm (Table) ................................

Cap Screws M6-1 x 25 (Rear Rail) ...................

Hex Bolts M6-1 x 20 (Front Rail) .......................

Lock Washers 6mm (Front Rail) .......................

Flat Washers 6mm (Front Rail) .........................

Hex Nut M8-1.25 (Fence Lock Lever) ...............

Hex Nut M6-1 (Rail Pad) ...................................

Flat Washer 8mm (Attachment Lock Handle) ...

Tools & Other Miscellaneous Items: Qty

Hex Wrench 5mm ..............................................

Hex Wrench 8mm ..............................................

Open End Wrench 10/13mm .............................

Table Pin ...........................................................

Table Insert .......................................................

Rail Pad M6-1 x 18 (attaches to fence) ............

Fence Lock Lever M8-1.25 x 22 .......................

Fence Attachment Lock Handle M8-1.25 x 44 ..

Fence Attachment T-Slot Nut ............................

Figure 2. Bandsaw components.

Figure 3. Fence components.

If any nonproprietary parts are missing (e.g. a

nut or a washer), we will gladly replace them, or

for the sake of expediency, replacements can be

obtained at your local hardware store.

NOTICE

Some hardware/fasteners on the inventory

list may arrive pre-installed on the machine.

Check these locations before assuming that

any items from the inventory list are miss

ing.

Inventory

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 63 64

Comments to this Manuals

No comments

Grizzly G0640X User Manual Page 13

Comments to this Manuals

Related products and manuals for Power saws Grizzly G0640X