Grizzly 12" Jointer w/spiral cutterhead manual insert User Manual download pdf (Page 45)

-30-

G0609 12" Parallelogram Jointer

Cleaning the Model G0609 is relatively easy.

Vacuum excess wood chips and sawdust, and

wipe off the remaining dust with a dry cloth. If any

resin has built up, use a resin dissolving cleaner

to remove it. Treat all unpainted cast iron and

steel with a non-staining lubricant after cleaning.

Cleaning

SECTION 6: MAINTENANCE

Protect the unpainted cast iron surfaces on the

table by wiping the table clean after every use—

this ensures moisture from wood dust does not

remain on bare metal surfaces.

Keep tables rust-free with regular applications of

products like G96

Gun Treatment, SLIPIT

, or

Boeshield

T-9 (see SECTION 5: ACCESSORIES

on Page 27 for more details).

Unpainted Cast Iron

For optimum performance from your machine,

follow this maintenance schedule and refer to any

specific instructions given in this section.

Daily Maintenance

• Vacuum all dust on and around the

machine.

• Wipe down tables and all other unpainted

cast iron with a metal protectant.

Monthly Maintenance

• Inspect V-belts for tension, damage, or

wear.

• Clean/vacuum dust buildup from inside cabi

net and off of motor.

Schedule

Since all bearings are sealed and permanently

lubricated, simply leave them alone until they

need to be replaced. DO NOT lubricate them.

Lubrication

Always disconnect power

to the machine before

performing maintenance.

Failure to do this may

result in serious person

al injury.

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 72 73

Comments to this Manuals

No comments

Grizzly 12" Jointer w/spiral cutterhead manual insert User Manual Page 45

Comments to this Manuals

Related products and manuals for Tools Grizzly 12" Jointer w/spiral cutterhead manual insert