Grizzly G4186Z User Manual download pdf (Page 14)

-12- G4186Z 18" Bandsaw

Rails and Fence

When installing the fence, notice that the front

and back edges of the table have two threaded

holes. These holes accept the round spacers and

socket head cap screws that attach the fence

rails to the table. To install the rails and fence:

1. Place the two spacers in the table, similar

to Figure 6.

Figure 8. Rail and fence assembly.

4. Slide the back rail into the fence rear lock

and secure the rail to the back edge of the

table with the cap screws and spacers pro-

vided.

5. Check to make sure that the fence moves

smoothly along the fence rails.

See the Adjustments Section for more informa-

tion on how to align the table and fence to the

blade.

For quick fence removal and replacement:

The easiest way to remove the fence is to

remove the cap screws from the rail and slide the

rail through the fence. This procedure will prevent

you from having to remove the blade and will

avoid all the adjustments associated with track-

ing and tension when you install the blade again.

Figure 7. Securing the rail to the table.

Figure 6. Spacer in table recess.

2. Slide one of the rails into the circular cast-

ing at the front of the fence.

3. Slide the cap screws through the rail and

spacers, and tighten the cap screws as

shown in Figure 7, so the rail is secured to

the table. Be sure the fence rail is mounted

so that it extends beyond the left edge of

the table as shown in Figure 8.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 47 48

No comments

Grizzly G4186Z User Manual Page 14