Grizzly G4186Z User Manual download pdf (Page 8)

-6- G4186Z 18" Bandsaw

Extension Cords

We do not recommend the use of extension cords

on 220V equipment. It is much better to arrange

the placement of your equipment and the

installed wiring to eliminate the need for exten-

sion cords. Should it be necessary to use an

extension, make sure the cord is rated Hard

Service (Grade S) or better. Refer to the chart in

Section 1: Safety Instructions to determine the

minimum gauge for the extension cord. The

extension cord must also contain a ground wire

and plug pin. Always repair or replace extension

cords when they become worn or damaged.

We have covered some basic electrical

requirements for the safe operation of your

bandsaw. These requirements are not nec-

essarily comprehensive. You must be sure

that your particular electrical configuration

complies with local and state codes.

Ensure compliance by checking with your

local municipality or a licensed electrician.

Your Model G4186Z Bandsaw comes pre-wired

for 220 volt operation. A wiring diagram is provid-

ed at the back of this manual should it be neces-

sary to repair or revise the wiring. Always utilize a

qualified electrician when doing any electrical

work on this equipment.

Wiring Diagram

Grounding

In the event of an electrical short, grounding

reduces the risk of electric shock by providing

electric current a path of least resistance. This

tool is equipped with a power cord having an

equipment-grounding conductor. See Figure 1.

The outlet must be properly installed and ground-

ed in accordance with all local codes and ordi-

nances.

This equipment must be

grounded. Verify that any

existing electrical outlet

and circuit you intend to

plug into is actually

grounded. Under no cir-

cumstances should the

grounding pin from any

three-pronged plug be

removed. Serious injury

may occur.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 47 48

Comments to this Manuals

No comments

Grizzly G4186Z User Manual Page 8

Comments to this Manuals

Related products and manuals for Power saws Grizzly G4186Z