Grizzly G7945 User Manual download pdf (Page 31)

G7945/G7946 Radial Drill Press

-29-

Head Adjustments

Figure 27. Lock pin location.

The headstock can be tilted from 45° clockwise to

90° counterclockwise.

To tilt the headstock:

1. Loosen the clamp bolt on the right side of the

headstock.

2. Pull out the guide pin located on the left side

of the headstock and rotate the pin 90° as

shown in

Figure 27.

Lock

3. Tilt the headstock to the desired angle speci-

fied on the scale and tighten the clamp bolt

on the right side of the headstock.

To return to vertical position:

1. Loosen the clamp bolt located on the right

side of the headstock.

2. Move the lock pin back into the guide slot.

3. Return the headstock to the vertical position.

The headstock should lock into place.

Note: The lock pin is only intended to be a

rough indexing tool.

4. For finer adjustments, align the zero mark

on the headstock scale with the line on the

horizontal column.

5. Tighten the clamp bolt.

To adjust the headstock back and forth:

1. Loosen the clamp bolt located on the right

side of the headstock.

Turn the black ribbed handle to move the

headstock back and forth the to desired posi

tion. Tighten the clamp bolt before operating

the machine.

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 51 52

No comments

Grizzly G7945 User Manual Page 31