Grizzly G0640X User Manual download pdf (Page 15)

G0640X 17" Wood/Metal Bandsaw

-13-

Moving & Placing

Bandsaw

This is an extremely heavy machine. Serious

personal injury may occur if safe moving

methods are not followed. To be safe, you

will need assistance and a forklift or a hoist

when removing the machine from the crate.

Use a chain or a lifting strap with a minimum

of 500 lbs. lifting capacity. If the chain or

lifting strap breaks, serious personal injury

may occur.

Figure 6. Lifting the bandsaw.

Special care should be taken when moving this

bandsaw. Only use the following methods to lift or

move this bandsaw.

To move and place the bandsaw:

1. Use a forklift to move the bandsaw on the

pallet near its final location.

2. Unbolt the bandsaw from the pallet.

3. Place the lifting hook through the eye bolt

(Figure 6) that is located on top of the

machine.

4. Carefully lift the machine and place where

desired.

We recommend mounting your new machine to

the floor. Because floor materials may vary, floor

mounting hardware is not included. You may also

mount your machine to a mobile base (such as

shown in Figure 7) with wheel locking or wheel

retracting capabilities that prevent rolling when

not in use.

Mounting

Figure 8. Typical concrete mounting fasteners.

Lag Shield

Lag Bolt

Anchor Stud

Bolting to Concrete Floors

Lag shield anchors with lag bolts (Figure 8) and

anchor studs are two popular methods for anchor

ing an object to a concrete floor. We suggest

you research the many options and methods for

mounting your machine and choose the best that

fits your specific application.

Figure 7. Model G7315 Shop Fox mobile base.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 63 64

Comments to this Manuals

No comments

Grizzly G0640X User Manual Page 15

Comments to this Manuals

Related products and manuals for Power saws Grizzly G0640X