Grizzly G0640X User Manual download pdf (Page 16)

-14-

G0640X 17" Wood/Metal Bandsaw

Assembly

To assemble the bandsaw:

1. Thread an M8-1.25 hex nut half way up the

length of the included M8-1.25 x 100 hex bolt

(the longest one in the hardware bag).

2. Thread the M8-1.25 x 100 hex bolt (otherwise

known as the "Positive Stop Bolt") into the

casting near the trunnion base, as shown in

Figure 9.

Note: The positive stop bolt acts as a table

stop, which makes it easy to bring the table

back to 90° after tilting it.

Figure 9. Positive stop bolt installed.

Positive

Stop

Bolt

Table Trunnion

Figure 11. Quick release tension lever.

Tighten

Loosen

4. Loosen blade tension by rotating the quick

release tension lever clockwise as shown in

Figure 11.

3. Slide the handwheel onto the shaft, as shown

in Figure 10, and thread the M6-1 x 20 cap

screw through the side of the handwheel and

against the shaft to secure the handwheel in

place.

Figure 10. Handwheel installed.

Handwheel

5. Adjust the upper and lower blade guides

away from the blade. Refer to

Adjusting

Blade Guides on

Page 20 for more details.

The table is heavy. To

reduce the risk of injury

when lifting, have another

person help you during

the next step.

The saw blade is very

sharp and can easily cut

bare hands. Wear heavy

leather gloves whenever

handling.

6. Open the upper and lower wheel covers, and

slide the blade off of both wheels.

7. Place the table onto the trunnion and posi-

tion it so the mounting holes in the table are

aligned with those on the trunnion.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 63 64

Comments to this Manuals

No comments