Grizzly 12" Jointer w/spiral cutterhead manual insert User Manual Page 50
- Page / 73
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
G0609 12" Parallelogram Jointer
-35-
Tools Needed Qty
Straightedge ...................................................... 1
Knife Setting Jig (Optional) ...............................
1
Hex Wrench 3mm ..............................................
1
Wrench 10mm ...................................................
1
To adjust/replace the knives:
1. DISCONNECT JOINTER FROM POWER
SOURCE!
2. Loosen the set screws shown in Figure 10,
Page 17, remove the cutterhead guard, and
move the fence back as far as it will go.
3. Open the pulley cover to expose the cutterhead
pulley.
4. Rotate the cutterhead pulley to get access to
one of the cutterhead knives.
5. Loosen the cutterhead gib bolts, starting in
the middle, and alternating back and forth
until all of the gib bolts are loose, but not fall
-
ing out.
—If this is the first time you are setting the
knives, remove the gib and knife from the
cutterhead.
6. Remove and clean the gibs and clean inside
the cutterhead slot to remove all pitch or saw
-
dust. Coat the knives and gibs with a metal
protectant (
Page 27), then fit the gibs back in
the cutterhead with the new knives.
Figure 44. Cutterhead profile diagram.
The Model G0609 comes with jack screws inside
the cutterhead to adjust the knives (see
Figure
44).
Figure 43. Using knife setting jig to set knife
height.
Knife Setting Jig Method: Both tables are low-
ered to fit the jig on the cutterhead, as shown in
Figure 43, and the knife heights are set to just
touch the middle pad of the jig.
The knife setting jig makes it easy to ensure that
the knives project out of the cutterhead evenly.
After using the knife setting jig to set the knives,
you have to re-adjust the outfeed table height to
ensure that it is even with the knives at their high
-
est point of rotation. If you are using the positive
stops on the tables, they will need to also be reset
before operation.
- MODEL G0609X 1
- 12" JOINTER 1
- 3
- G0609X 220V Wiring Diagram 4
- Jointer Breakdown 5
- Jointer Breakdown Parts List 6
- Tables Breakdown 7
- Fence Breakdown 8
- Stand Breakdown 9
- Stand Parts List 10
- Labels Breakdown 11
- G0609X ACCESSORIES 12
- MODEL G0609 13
- 12" PARALLELOGRAM 14
- Table of Contents 16
- INTRODUCTION 18
- MACHINE DATA 19
- Identification 21
- 22
- SECTION 1: SAFETY 22
- 8" 24
- 220V Single-Phase 25
- SECTION 3: SET UP 26
- Inventory 27
- Hardware Recognition Chart 28
- Site ConsiderationsClean Up 29
- Moving & Placing 30
- Mounting to Shop 30
- Pedestal Switch 32
- Winding Cutterhead 32
- Knife Setting Jig 33
- Checking Outfeed 33
- Table Height 33
- Dust Port 34
- Test Run 34
- SECTION 4: OPERATIONS 35
- Stock Inspection 36
- Squaring Stock 37
- Surface Planing 38
- Edge Jointing 39
- Bevel Cutting 40
- Rabbet Cutting 41
- SECTION 5: ACCESSORIES 42
- SECTION 6: MAINTENANCE 45
- Maintenance Log 46
- SECTION 7: SERVICE 47
- 16" per 48
- Adjusting/Replacing 49
- Inspecting Knives 49
- Checking/Adjusting 52
- Table Parallelism 52
- Adjusting Table Parallelism 53
- Checking Infeed Table 53
- Setting Outfeed 54
- Setting Infeed Table 55
- Calibrating Depth 56
- Pulley Alignment 58
- G0609 Electrical Components 60
- G0609 Wiring Diagram 61
- Base Assembly Parts Breakdown 62
- Base Parts List 63
- Table Parts List 64
- Fence Parts List 65
- Warning Label Parts List 68
- WARRANTY AND RETURNS 69
- 70
- 71
- 73
- 73
Related products and manuals for Tools Grizzly 12" Jointer w/spiral cutterhead manual insert
Tools Grizzly H7677 User Manual
(20 pages)
(20 pages)
Tools Grizzly H6143 User Manual
(20 pages)
(20 pages)
Tools Grizzly G0552 User Manual
(2 pages)
(2 pages)
Tools Grizzly G0677 User Manual
(18 pages)
(18 pages)
Tools Grizzly G9972Z User Manual
(15 pages)
(15 pages)
Tools Grizzly H5529 User Manual
(2 pages)
(2 pages)
Tools Grizzly 230V User Manual
(20 pages)
(20 pages)
Tools Grizzly H7758/H7759 User Manual
(28 pages)
(28 pages)
Tools Grizzly H0801 1800W User Manual
(6 pages)
(6 pages)
Tools Grizzly G6049 User Manual
(17 pages)
(17 pages)
Tools Grizzly G1370 User Manual
(2 pages)
(2 pages)
Tools Grizzly G1200 User Manual
(3 pages)
(3 pages)
Tools Grizzly H8231 User Manual
(2 pages)
(2 pages)
Tools Grizzly G5979 User Manual
(32 pages)
(32 pages)
© 2020, manymanuals.com. All rights reserved. | 0.531 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals