Grizzly G0605X User Manual download pdf (Page 25)

G0605X/G0606X Extreme Series 12" Table Saw

-23-

Table Insert

You MUST install the table insert before operating

the table saw.

Components and Hardware Needed: Qty

Table Insert ........................................................

Flat Head Screw M5-.8 x

20 ............................. 1

To install and adjust the table insert:

1. DISCONNECT THE SAW FROM POWER!

2. Place the table insert into the table and tight-

en the screw shown in

Figure 25.

3. Place a straightedge across the table and the

table insert.

4. Use a 3mm hex wrench and straightedge to

adjust the table insert flush with the table as

shown in

Figure 26.

NOTICE:

The table insert must be flush with the

table top or the workpiece will hit the edge of the

table insert at the beginning of the cut.

Figure 26. Adjusting the table insert.

4. Reinstall the table insert and secure it with

the screw removed in Step 2

Figure 27. Splitter installed.

Bracket

Lever

Splitter

Blade Guard and

Splitter

You MUST install the blade guard and splitter

before operating the table saw.

Components and Hardware Needed: Qty

Splitter

............................................................... 1

Blade Guard ......................................................

To install the blade guard:

1. DISCONNECT THE SAW FROM POWER!

2. Raise the blade up all the way, unscrew the

screw on the table insert, and remove the

insert.

3. Lift the lever shown in Figure 27, insert the

splitter into the bracket slot, and turn the lever

down to lock the splitter.

Figure 25. Table insert screw.

Table Insert

Screw

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 75 76

Comments to this Manuals

No comments

Grizzly G0605X User Manual Page 25

Comments to this Manuals

Related products and manuals for Power saws Grizzly G0605X