Grizzly G0605X User Manual download pdf (Page 52)

-50-

G0605X/G0606X Extreme Series 12" Table Saw

Figure 77. 45° stop bolt and jam nut.

45° Stop Bolt

Jam Nut

5. Continue adjusting the stop bolt until it con-

tacts the cabinet when the blade is at 45

°.

6. Tighten the jam nut.

To adjust the tilt indicator arrow:

1. Set the 90° stop bolt (see instructions on

Page 49).

2. Loosen the blade height handwheel set screw

and remove the handwheel.

3. Loosen the button head cap screw shown in

Figure 78 and move the tip of the indicator to

0°.

Figure 78. Tilt indicator arrow.

Indicator

Button Head

Cap Screw

Digital Readout

The digital readout displays the current blade

angle. We recommend you set the readout after

verifying the 90° and 45° blade tilt stops.

To set the digital readout

:

1. Move the blade angle to 0° and press the 0°

SET button (

Figure 79) for several seconds

until the readout displays 0.00.

2. Move the blade angle to 45° and press the

SET button for several seconds until the

readout displays 45.0.

Note: If you move the blade angle handwheel

when the power is

disconnected, the digital

readout will be incorrect when the saw is

reconnected.

Figure 79. Digital readout.

45° Set Button

0° Set Button

4. Loosen the jam nut (Figure 77) on the 45°

stop bolt, adjust the stop bolt up or down,

then check to see if the blade is 45° to the

table.

4. Tighten the cap screw and reinstall the

handwheel.

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 75 76

Comments to this Manuals

No comments