Grizzly G0605X User Manual download pdf (Page 29)

G0605X/G0606X Extreme Series 12" Table Saw

-27-

4. Remove all tools and foreign objects from

the machine.

5. Connect the tablesaw to the power source.

6. Put on safety glasses and hearing protec-

tion, and make sure any bystanders are

wearing safety glasses, hearing protection,

and are out of the way.

7. Make sure the safety pin is not installed.

8. Keep a finger on the STOP paddle (Figure

31) at all times during the test run.

9. Press the ON button.

—If any problems occur, immediately press

the STOP paddle and DISCONNECT THE

SAW FROM THE POWER SOURCE.

Turn to

Troubleshooting on Page 45 and

correct the problem before operating the

machine further.

—If you cannot easily locate the source of

an unusual noise or vibration by yourself,

please contact Technical Support at (570)

546-9663.

—If the saw is operating normally, press the

STOP paddle. This should stop the saw.

10. Lift the paddle switch and insert the safety pin

through the ON button.

11. Press the ON button.

— If the saw starts, immediately press the

OFF button and DISCONNECT THE SAW

FROM THE POWER SOURCE. The safety

disabling feature is not working correctly.

Please contact our Technical Support at

(570) 546-9663 immediately.

— If the saw does not start, the safety dis

abling feature is working correctly.

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 75 76

No comments

Grizzly G0605X User Manual Page 29