Grizzly G0605X User Manual download pdf (Page 31)

G0605X/G0606X Extreme Series 12" Table Saw

-29-

Disabling On/Off

Switch

To disable the switch and prevent accidental

startup, insert the safety pin through the holes in

the ON button, and insert the end of the chain into

the pin as shown in Figure 37

Figure 37. Disabling switch.

Safety







Ripping blade features:

• Best for cutting with the grain of the

workpiece.

• 20-40 teeth.

• Flat-top ground tooth profile.

• Large gullets for large chip removal.

Figure 38. Ripping blade.

Blade Selection

Crosscut blade features:

• Best for cutting across the grain of the

workpiece.

• 60-80 teeth.

• Alternate top bevel tooth profile.

• Small hook angle and a shallow gullet.







Figure 39. Crosscutting blade.

Combination blade features:

• Adequate for cutting both with and across the

grain.

• 40-50 teeth.

• Alternate top bevel and flat, or alternate top

bevel and raker tooth profile.

• Teeth are arranged in groups of five.

• Gullets are small and shallow within the

groups of five teeth, similar to a cross-cut

blade; then large and deep between each

group of five, like a ripping blade.











Figure 40. Combination blade.

Safety Pin

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 75 76

Comments to this Manuals

No comments

Grizzly G0605X User Manual Page 31

Comments to this Manuals

Related products and manuals for Power saws Grizzly G0605X